泡沫彩钢净化板
构成:采用阻燃型 EPS 为芯材,热镀锌彩涂板为面层 ( 两层 ) 及高强度粘剂,通过高速连续自动化成型机加温、加压复合,裁切、修边而成的新一代建筑装潢板材。
Composition:Using flame-retardant EPS as the core material, hot-dip galvanized color coated sheet as the surface layer of two layers and high-strength adhesive,through high-speed continuous automatic molding machine heating, pressure compound, cutting, trimming the edge of a new generation of building decoration board.
规格:
宽度:950、1150mm
厚度:50、75、100、150、200mm
长度:按工程要求及运输条件定做
颜色:按工程要求选取
品种:H 板 ( 平板、压型 )、企口板、瓦楞夹芯板
性能及质量标准:
自重:10.0-13.6kg/m²
导热系数:0.034-0.037w/m.k 氧指数 (oi):34.0( 省消防产品质检站 )
隔声性能:19dB(A)(75mm 厚)
芯材:聚苯乙烯泡沫塑料板应符合 GB10801 的规定,体积密度不小于 12KGm³, 导热系数不大于 0.041W/(mk),阻燃性 (ZR),氧指数不小于 30%
粘结剂:粘结强度应大于 0.1Mpa
剥离性能:剥离实验时,粘结在面材上的聚苯乙烯泡沫塑料粒子应均匀分布,每个剥离面的粘结面积应不小于 85%
Specification:
Width:950、1150 mm
Thickness:50、75、100、150、200 mm
Length:According to engineering requirements and transportation conditions custom
Color:According to engineering requirements to select
Varieties:H plate, compression type, plate, corrugated core plate Performance and quality standard:Deadweight: 10.0-136 kg /m²Thermal conductivity:0.034-0.037 W /m.k
O Index Oi:34.0 provincial fire product quality inspection station Sound insulation performance:19 dB (A) (75 mm thick)
Core material:Polystyrene Foam plastic plate should comply with the require-ments of GB10801, the volume density is not less than 12 KGm³, thermal conductivity is not more than 0.041 W /( mk), Flame Retardant( ZR), oxygen index is not less than 30% Binder:Bonding strength should be greater than 0.1 Mpa
Peeling performance:Peeling Experiment, the polystyrene foam particles bonded to the surface material should be evenly distributed, each peeling surface area should not be less than 85%

<
<
<
<
客服1 